What the Micro SD Card Module Adds to Your Project
The Micro SD Card Module for Arduino gives your board persistent storage beyond the limited EEPROM. You can log sensor data, store GPS tracks, hold configuration files, or even load images for a TFT display. The module uses a standard 4-wire SPI interface, so it works with most Arduino boards and even ESP32 without extra libraries.
Module Specifications That Shape Your Setup
- Micro SD Card Module for Arduino: The module uses an onboard level shifter to convert 5V SPI signals to 3.3V for the card interface, and works at SPI speeds up to 25 MHz. This means you can connect it directly to your Arduino's 5V logic without a separate voltage regulator, and the 25 MHz speed is fast enough for most data logging and file access tasks.

Micro SD Card Module for Arduino - Micro SD Card Module for Arduino: It accepts Micro SD cards up to 32 GB formatted as FAT16 or FAT32. You don't need a special card; any standard Micro SD card up to 32 GB works. Format it as FAT16 or FAT32 on your computer before first use.
- Micro SD Card Module for Arduino: Compatible with the Arduino SD library — no extra libraries needed. The built-in SD library handles file create, write, read, and delete operations. You don't need to install or manage any third-party code.
How to Set Up the Micro SD Card Module
Follow these steps to get your module working with an Arduino Uno or similar board.
- Format the Micro SD Card: Insert the card into your computer and format it as FAT16 or FAT32. Cards up to 32 GB are supported. Use the SD Association's formatter tool if your OS doesn't give you the option.
- Wire the Module to Your Arduino: Connect the module's SPI pins to your Arduino: MOSI to 11, MISO to 12, SCK to 13, and CS to 10 (or another digital pin). Power the module from the Arduino's 5V pin and connect ground. The onboard level shifter handles the voltage conversion.
- Load the SD Card Example Sketch: Open the Arduino IDE, go to File > Examples > SD > CardInfo. This sketch reads the card's details and confirms your wiring. Upload it to your board.
- Test and Verify: Open the Serial Monitor (set to 9600 baud). If the module is wired correctly, you'll see the card's type, size, and file system. If not, double-check your SPI pin connections.
Practical Uses for the Module
Once your module is set up, you can log sensor data to a text file, record GPS coordinates, store configuration settings, or even play audio with a DFPlayer. The SD library makes file operations straightforward, and the module draws power from the Arduino's 5V supply, so no extra power source is needed.
What the Supplied Information Does Not Cover
The catalog does not specify exact wiring diagrams for every Arduino model, nor does it include preparation or operating instructions. The compatibility and speed figures come from the supplied product record. For boards other than Arduino Uno, verify the SPI pin mapping for your specific model.


