What This Connector Does for Your CCTV Setup
A reliable power connection is the backbone of any surveillance system. The 2pcs 12V DC Male Power Connector Adapter Jack Plug for CCTV Camera provides a straightforward way to connect your camera to a 12V DC power supply. Its simple plug-in design reduces installation time, letting you focus on positioning and testing your camera rather than wrestling with wires.
Connector Specifications That Matter
- 2pcs 12V DC Male Power Connector Adapter Jack Plug for CCTV CAMERA: Each connector measures 2.1 × 5.5 mm, providing a compact fit for typical camera power inputs. The 2.1 × 5.5 mm size is a common standard for CCTV cameras. Knowing these dimensions helps you confirm compatibility with your camera's power jack before you start wiring.

2pcs 12V DC Male Power Connector Adapter Jack Plug for CCTV CAMERA - 2pcs 12V DC Male Power Connector Adapter Jack Plug for CCTV CAMERA: Designed for 12 V DC systems commonly used in surveillance equipment. Most CCTV cameras run on 12V DC. Matching the voltage ensures safe operation and prevents damage to the camera or power supply.
How to Wire the Connector to Your Camera
Wiring the DC male connector is a simple process. Follow these steps to get a secure connection.
- Prepare the power supply cable: Strip a short length of insulation from the end of your 12V DC power supply cable, following the supplied product instructions. You should see two wires: positive (usually red) and negative (usually black).
- Attach the connector: Insert the stripped wire ends into the corresponding terminals on the DC male connector. The connector's compact 2.1 × 5.5 mm body fits snugly into most camera power jacks.
- Secure the connection: Tighten any screws or crimp the connector according to its design. Ensure the wires are firmly held and cannot pull out.
- Test the connection: Plug the connector into your CCTV camera's power input. Connect the power supply to a 12V DC source and verify the camera powers on.
Compatibility Check Before You Buy
Before purchasing, verify that your camera's power input matches the 2.1 × 5.5 mm plug size. Most standard CCTV cameras use this size, but it's always wise to check. The connector is designed for 12V DC systems, so confirm your power supply outputs 12V DC. The pack includes two connectors, giving you a spare for another camera or a backup.


