Back to Blog
Comparisons 2026-11-20 Kunkune 0 views

ENC28J60 vs W5500: Which Ethernet Shield for Arduino?

ENC28J60 vs W5500: Which Ethernet Shield for Arduino?

Compare the ENC28J60 Nano V3 Ethernet Shield and W5500 modules for Arduino projects: form factor, speed, library support, and which fits your build.

Choosing Between Two Wired Network Options for Arduino

When your Arduino project needs a reliable wired network connection rather than Wi-Fi, two common chips fill that role: the ENC28J60 and the W5500. Both are Ethernet controllers that communicate over SPI, but they differ in speed, form factor, and library compatibility. This comparison focuses on the ENC28J60 Nano V3 Ethernet Shield from Kunkune and how it stacks up against a typical W5500 module, so you can pick the right one for your build.

Key Differences Between ENC28J60 Nano V3 and W5500

  • Form factor and board size: The ENC28J60 Nano V3 is a Nano-form-factor shield that plugs directly onto an Arduino Nano V3.0 header without a breadboard or jumper cables. Its RJ45 connector sits at the board edge, making it ideal for compact enclosures. A typical W5500 module is often larger and may require a separate shield or adapter board for Nano-sized Arduinos.
  • Network speed: The ENC28J60 chip supports 10 Mbps wired Ethernet via SPI. The W5500 supports 10/100 Mbps. For basic IoT nodes, sensor data logging, or simple web servers, 10 Mbps is sufficient. If your project transfers larger files or needs faster response, the W5500's higher speed may be useful.
  • Library support: The ENC28J60 Nano V3 is compatible with the UIPEthernet library, which is widely used and well-documented. The W5500 typically uses the W5500 library or the standard Ethernet library. Both have good community support, but the ENC28J60's library is lighter and works well on smaller microcontrollers.
  • Power requirements: The ENC28J60 Nano V3 uses 3.3V logic with a 5V compatible module, meaning it can run on standard Arduino power. The W5500 also operates at 3.3V but may draw slightly more current. Neither module's exact current draw is specified in the supplied information, so test with your power supply.
  • Ease of setup: The ENC28J60 Nano V3 plugs directly onto the Arduino Nano headers with no extra wiring or breadboard. The W5500 often requires a shield or adapter, especially for Nano form factors. If you want the simplest physical setup, the Nano shield wins.

ENC28J60 Nano V3 Ethernet Shield at a Glance

  • ENC28J60 Nano V3 Ethernet Shield Webserver Module: This Nano-form-factor ENC28J60 shield plugs directly onto an Arduino Nano V3.0, adding a wired 10Mbps Ethernet port over SPI without requiring a breadboard or jumper cables. If you are building a compact wired IoT node or web server with an Arduino Nano, this shield saves space and simplifies wiring compared to a larger W5500 shield.
    ENC28J60 Nano V3 Ethernet Shield Webserver Module
    ENC28J60 Nano V3 Ethernet Shield Webserver Module
  • ENC28J60 Nano V3 Ethernet Shield Webserver Module: Compatible with the UIPEthernet library. The UIPEthernet library is lightweight and well-supported, making it easy to get a simple web server or network client running quickly.
  • ENC28J60 Nano V3 Ethernet Shield Webserver Module: 3.3V logic with 5V compatible module. You can power it from the same 5V supply as your Arduino Nano, without needing a separate voltage regulator.

Which One Should You Choose?

The ENC28J60 Nano V3 is the better choice if you are using an Arduino Nano, need a compact wired connection, and your project does not require more than 10 Mbps speed. Its direct plug-in design and UIPEthernet library support make it a straightforward option for web servers, sensor nodes, and remote relay controllers.

A W5500 module becomes more attractive if you need 100 Mbps throughput, are using a full-sized Arduino (Uno, Mega) or a board with a standard shield form factor, and prefer the wider library ecosystem. The W5500 also has a larger community footprint, which may help if you encounter issues.

Neither module is universally better—the right pick depends on your board size, speed requirements, and how much wiring you want to do. For Nano-based projects that prioritize simplicity and compactness, the ENC28J60 Nano V3 is a strong candidate.

What the Supplied Information Does Not Cover

The supplied records do not include exact current draw, maximum cable length, or detailed installation steps for either module. For specific wiring diagrams or troubleshooting, refer to the UIPEthernet library documentation or the manufacturer's datasheet. Test your setup with a known working Ethernet cable and power supply before deploying.

Related Articles

Customer Service
Home
Products
Cart
Profile