Kunkune

STM32F103C6T6 ARM STM32 最小系統開發板 (克隆晶片)

STM32F103C6T6 ARM STM32 最小系統開發板

STM32F103C6T6 ARM STM32 最小系統開發板 (克隆晶片) - Main image
$2.35 $3.45 In stock

Category: Arduino 相容板

STM32F103C6T6 ARM STM32 最小系統開發板 — 克隆晶片

此最小系統板搭載 STM32F103C6T6 ARM Cortex-M3,主頻 72MHz,具備 32KB Flash 與 10KB SRAM,採用緊湊設計,僅有一個 USB Micro‑B 連接埠供程式寫入。可透過 STM32CubeIDE、Arduino IDE(STM32duino)或 PlatformIO 進行程式燒錄,使用內建序列引導程式或透過 ST‑Link V2 的 SWD 介面。BOOT0 跳線可在正常執行模式與序列引導程式模式之間切換,以實現免驅動程式的燒錄。

  • STM32F103C6T6 Cortex-M3,72MHz
  • 32KB Flash,10KB SRAM
  • 37 個 GPIO 腳位 — 其中 10 個具備 ADC、UART、SPI、I2C、CAN 功能
  • USB Micro‑B — 內建序列引導程式,免驅動程式燒錄
  • BOOT0 跳線 — 可選擇引導程式模式或正常執行模式
  • SWD 接腳排 — ST‑Link V2 除錯介面

適用於

STM32 初學者專案、從 Arduino 轉向 ARM Cortex-M、USB HID 原型,以及需要比 ATmega328P 更高運算效能且價格相近的專案。

為何選擇 Kunkune

自英國庫存發貨。60 天退貨,無最低訂購量。快速 Royal Mail 送達。

使用 ST‑Link V2 程式器透過 SWD 接腳排為此開發板燒錄與除錯。

大量採購? 訂購 10 件以上,請聯絡我們取得批發價格。

付款前再看一眼

可用付款方式和最終總額會在結帳頁顯示。

為活動安排下單

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
計畫有變時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
安排配送

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨安排

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (4.8 / 5 · 5 reviews)

Chloe ★★★★★

For the price, getting a 72MHz ARM Cortex-M3 with 32KB flash on such a small board is impressive — it compiled my code without a hitch. Boots up reliably via USART, and the compact layout fits nicely on a breadboard for testing.

Natalie G. ★★★★★

I needed a 72MHz Cortex-M3 for a small project and this board delivers exactly that, with the 32KB flash being plenty for my code. The compact layout made it easy to breadboard and it runs stable at the advertised clock speed.

Emily ★★★★★

Got this to mess around with bare-metal programming and it fits perfectly on a breadboard, which is exactly what I wanted. The 32KB flash is a bit tight if you're used to bigger chips, but for blinking LEDs and learning the registers it's more than enough. Bootloader works fine over the serial pins