Kunkune

ESP-12E ESP8266 串列無線 WIFI 模組

ESP-12E ESP8266 串列無線 WIFI 模組

ESP-12E ESP8266 串列無線 WIFI 模組 - Main image
$1.59 $2.45 In stock

Category: ESP32 and ESP8266

型號:ESP8266-12
ISM 2.4GHz
PA +25dBm
802.11b/g/n

警告:
1.本模組需要 3.3 伏特的 VCC 電源,且使用 3.3V 邏輯

2.本模組不耐 5V,連接 RX 或 TX 時使用 5V 電源會損毀此模組

3.必須使用電平轉換器,或使用 3.3V 的 Arduino

4.Arduino Uno 上的 3.3V 電源電流不足,無法為本模組供電

5.必須提供獨立、較高的 3.3V 電源(約 300mA 或更佳)

付款前再看一眼

可用付款方式和最終總額會在結帳頁顯示。

為活動安排下單

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
計畫有變時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
安排配送

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨安排

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (4.6 / 5 · 5 reviews)

Elizabeth ★★★★★

Built a small relay controller with this and it connected to my router in under a minute. The +25dBm output means it reaches across my whole apartment, even through two walls. Just remember the 3.3V logic limit before you fry it like I almost did.

Jason S. ★★★★★

Used it to build a wifi temperature sensor for my greenhouse, and the 802.11b/g/n connection stays stable even with the metal frame nearby. Just make sure you give it exactly 3.3V on VCC—I fried one by accident using 5V logic.

Henry ★★★★★

The 2.4GHz range is solid for my IoT sensors, and I appreciate that the power output hits +25dBm for better signal penetration. Just remember to keep it at 3.3V logic—I blew one by accident before reading the warning.