Kunkune

Arduino MEGA 2560 用 センサシールド v2.0 拡張ボード (Mega 2560 R3対応)

Arduino MEGA 2560 用センサーシールド v2.0

Arduino MEGA 2560 用 センサシールド v2.0 拡張ボード (Mega 2560 R3対応) - Main image
$3.26 $4.4 In stock

Category: Arduino シールド

Arduino MEGA 2560 センサーシールド V2.0 — 拡張ボード

Mega 2560 センサーシールド V2.0 は、Mega 2560 のすべてのピンを 3 ピン VCC/GND/信号ソケットに変換し、37 個および 45 個キットのセンサーモジュールをブレッドボードなしで直接差し込めます。デジタルピン D0–D53、アナログピン A0–A15、そして I2C、SPI、UART 用の通信ピンはすべて 3 ピンヘッダーに分配されており、このシールドは Mega 2560 の 4 行のヘッダーに直接装着できます。

  • すべての Mega 2560 ピンが露出 — D0–D53、A0–A15 を 3 ピンセンサーソケットとして提供
  • I2C、SPI、UART ヘッダー — 専用バスコネクタ
  • 3 ピン VCC/GND/信号フォーマット — センサーモジュールの直接差し込み
  • Arduino Mega 2560 R3 に対応 — 4 つのヘッダー列すべてに対応

おすすめ用途

Mega ベースのセンサーアレイ、マルチチャンネルデータロギング、多数のセンサー入力を持つロボティクス、Mega 用教室向けセンサーキット実験、CNC や 3D プリンタのセンサー統合に最適です。

Kunkune の選ばれる理由

イギリス在庫から発送。60 日間の返品保証、最低注文数なし。ロイヤルメールで迅速配送。

大量購入ですか? 研究室向けのご注文は、取引価格についてお問い合わせください。

お支払い前にもう一度

利用可能な支払方法と最終金額は購入手続きで表示されます。

イベントに向けた注文

注文の処理時間と配送時間の両方を見込んでください。

Standard Shipping: 出荷準備(営業日) 0–1; 輸送(営業日) 7–15.

Express Shipping: 出荷準備(営業日) 0–1; 輸送(営業日) 7–15.

規定を見る
予定が変わったら

返金については注文番号を添えて店舗にお問い合わせください。

返送前に返金処理期間をご確認ください。

規定を見る
配送を計画する

お届け先と選択した配送方法の料金をご確認ください。

Standard Shipping · アメリカ合衆国: $0.00

Express Shipping · アメリカ合衆国: $3.99

規定を見る
返品の手配

返送する前に適用される返品条件をご確認ください。

アメリカ合衆国 · 返品期限(受取後の日数): 30. 返品方法: 郵送. 返品送料: 販売者負担.

規定を見る

Customer Reviews (5.0 / 5 · 5 reviews)

Eva D. ★★★★★

Finally, no more messing around with jumper wires for every single sensor — the VCC/GND/signal layout on this shield is a huge time saver. Every pin from my Mega is broken out cleanly, so I can just plug and play with my 37-piece sensor kit.

Ruby ★★★★★

Plugged this onto my Mega and suddenly every sensor has its own 3-pin VCC/GND/signal socket, so no more hunting for ground rails on a breadboard. The screw terminals for external power are a nice touch too. Built two projects with it this week and zero loose jumper issues.

Thomas W. ★★★★★

Wiring up my whole sensor array took a fraction of the time it usually does since every Mega pin now has its own VCC/GND/signal socket right there. No more jumper spaghetti running back to a breadboard rail. Solid board, seated firmly on the headers with no wiggle.